Features

  • Enhanced power transmission capacity up to 25%, compared to standard Belts
  • Lesser number of Belts are required as compared to multiple single-Belt drive system
  • Extended service life
  • Top curvature provides superior adhesion and accelerate heat dissipation rate
  • Controlled radial and lateral run-out facilitates smooth operation
  • Anti-static, oil and heat resistant
  • Temperature range: -18°C to +80°C
  • ATEX certified FRAS Belts are also available

Constructional Details

  • 1. Special Curved top tie band design for better flexibility and heat resistance
  • 2. High modulus - low shrinkage tension member embedded cushion rubber compound
  • 3. High tenacity, low stretch specially treated polyester cord
  • 4. Specially designed compression rubber gives stability to the Belt cross-section and supports the cord zone against deflection, under load condition
  • 5. Wear resistant, bias cut neoprene rubberized polyester cotton fabric

Product Range

Section Top Width (mm) Thickness (mm) Angle (Degree) Pitch (mm) Min. Pulley Dia. (mm) Manufacturing Range
Min. (inch / mm) Max. (inch / mm)
HA 13.0 10.5 40 15.9 80 33 / 838 255 / 6477
HB 17.0 14.5 40 19.0 130 43 / 1092 900 / 22860
HC 22.0 17.0 40 25.5 210 47 / 1194 923 / 23444
HD 32.0 21.5 40 37.0 370 90 / 2286 923 / 23444
HE 38.0 27.0 40 44.5 520 90 / 2286 922 / 23419
HSPZ 10.0 10.0 40 12.0 67 46.5 / 1180 357.5 / 9080
HSPA 13.0 12.0 40 15.0 100 38 / 959 175 / 4439
HSPB 17.0 17.0 40 19.0 160 69.5 / 1762 367.5 / 9331
HSPC 22.0 22.5 40 25.5 224 64 / 1632 926 / 23527
H3V 9.70 10.0 40 10.3 67 35 / 889 176 / 4470
H5V 15.8 16.5 40 17.5 180 50 / 1270 923 / 23444
H8V 25.4 25.0 40 28.6 317 100 / 2540 926 / 23527

Note

  • Intermediate sizes are available upon request

Reference Standards

ISO 5290, ISO 3790 & RMA IP-22


Applications

  • Crushers, pulverisers, pulpers, compressors, vibrating screens, generators, rolling mills, etc.

Product Label


Related Products

PIX-DuraBand®-XR
Banded Raw Edge Cogged Belts

PIXTRANS