|
Products-Power Drive
Products-Range |
|
TAPER BUSH PULLEYS |
|
Features :
• Produced to consistently high
quality
• High wear resistance material for longer life
• Anodized finish to improve grip allowing increased power
transmission
• Statically balanced to 40 mtr/sec (Q6.3 balance spec
giving smoother vibration free running)
• Consistent high quality, branded POWERDRIVE product
|
|
Section |
Stock Size Range |
|
SPZ |
56/1 - 500/5 |
|
SPA |
67/1 - 500/5 |
|
SPB |
100/1 to 500/5 |
|
SPC |
200/3 to 500/8 |
|
Intermediate & Larger sizes are available on request |
|
 |
|
<<Back<<
|
|
BUSHES |
|
Features :
• Manufactured from high quality
material to prevent cracking and breaking.
• Key position fixed in relation to grub screws.
• POWERDRIVE bushes are available in Metric and Imperial
bores.
• Series range from 1008-5050
• All bush surfaces are ground and checked in fit gauges.
|
|
Series |
Metric Stock
Sizes |
Imperial Stock
Sizes |
|
1008 |
10 mm to 25 mm |
3/8” to 1” |
|
1108 |
10 mm to 28 mm |
3/8” to 1-1/8” |
|
1210 |
11 mm to 32 mm |
1/2” to 1-1/4” |
|
1215 |
12 mm to 32 mm |
5/8” to 1” |
|
1610 |
12 mm to 42 mm |
1/2” to 1-5/8” |
|
1615 |
14 mm to 42 mm |
5/8” to 1-1/2” |
|
2012 |
14 mm to 50 mm |
5/8” to 1-7/8” |
|
2517 |
16 mm to 60 mm |
3/4” to 2-1/2” |
|
3020 |
20 mm to 75 mm |
1-1/4” to 3” |
|
3030 |
48 mm to 80 mm |
|
|
3525 |
35 mm to 100 mm |
1-1/2” to 3-1/2” |
|
3535 |
40 mm to 90 mm |
1-5/8” to 3-3/8” |
|
4030 |
40 mm to 100 mm |
|
|
4040 |
50 mm to 100 mm |
1-3/4” to 2-1/2” |
|
4545 |
75 mm to 100 mm |
|
|
5050 |
75 mm to 125 mm |
|
|
Intermediate & Larger sizes are available on
request |
|
 |
|
<<Back<< |
|
|
|
ROLLER CHAINS |
|
Features :
• Designed for demanding drives in Industry & Agriculture
• Manufacturing to BS228, ISO R606, DIN8187 and DIN8188
standards.
• Comprehensive range of Simplex, Duplex and Triplex; British
and American standard.
• Manufactured with hardened pins to prevent wear and
stretch, and to ease dismantling.
• Heavy duty American standard available for extra tough
conditions.
• Consistent quality, branded product. Each outer link
carries the POWERDRIVE logo. |
|
 |
Series |
ISO/ANSI Designation |
Stock Range |
|
British
Standard Simplex |
04B-1 to 32B-1 |
1/4” to 2”
pitch |
|
British
Standard Duplex |
06B-2 to 28B-2 |
3/8” to 1 3/4”
pitch |
|
 |
British
Standard Triplex |
06B-3 to 24B-3 |
3/8” to 1 1/2”
pitch |
American
Standard
Simplex |
ASA35-1
to
ASA160-1 |
3/8” to 2”
pitch |
American
Standard
Duplex |
ASA50-2
to
ASA160-2 |
5/8” to 2”
pitch |
|
 |
American
Standard
Triplex |
ASA100-3
to
ASA160-3 |
1 1/4” to 2”
pitch |
American
Standard
Simplex HD |
ASA60H-1
to
ASA140H-1 |
3/4” to 1 1/2”
pitch |
| |
Intermediate & Larger sizes are available on request |
|
|
|
Specifications
: Conforms to DIN 7753, BS AU 150b, SAE J 636, JASO E 107
Sections Available : AVX10, HAVX10, HAVX13,
17,20,22,25,17A, 20A, 22A, 25A, all other sections can be made
available on request. |
|
<<Back<<
|
|
SPROCKETS |
|
Features :
Taper Bush Sprockets
• Available in Simplex, Duplex and
Triplex
• Manufactured from C45 steel or Cast Iron
• Can be fitted to many shaft sizes with the use of Power
drive Bushes
Pilot Bore Sprockets
• Comprehensive range of British
Standard Simplex, Duplex and Triplex
• Manufactured from C45 steel or G22 Cast Iron for large
sizes
• Specific material or hardness available on request
• Non-standard features or Bored & Keyed sprockets available
to order
|
|
Pilot Bore |
|
 |
Size |
Stock
Range |
|
3/8” |
8 to 114 tooth |
|
1/2” |
9 to 114 tooth |
|
5/8” |
10 to 114
tooth |
|
3/4” |
11 to 114
tooth |
|
1” |
8 to 95 tooth |
|
1-1/4” |
8 to 76 tooth |
|
1-1/2” |
8 to 57 tooth |
|
Taper Bore |
|
 |
Size |
Stock Range |
|
3/8” |
17 to 95 tooth |
|
1/2” |
15 to 95 tooth |
|
5/8” |
12 to 95 tooth |
|
3/4” |
13 to 95 tooth |
|
1" |
13 to 95 tooth |
| |
Intermediate &
Larger sizes are available on request |
|
|
|
<<Back<<
|
|
MOTOR BASES |
|
 |
Part No. |
A
(mm) |
B
(mm) |
|
MM 210 |
210 |
195 |
|
MM 270 |
270 |
195 |
|
MM 340 |
340 |
290 |
|
MM 430 |
430 |
290 |
|
MM 490 |
490 |
410 |
|
|
<<Back<< |
|
TENSIONERS |
|
 |
Part No. |
Movement Degree |
Torque
Point-A |
(Newton's)
Point-J |
Weight
(in Kg) |
|
PD 10/11 |
0 - 30 |
85 |
113 |
0.28 |
|
PD 10/11 |
0 - 30 |
136 |
170 |
0.48 |
|
PD 10/11 |
0 - 30 |
340 |
425 |
0.73 |
|
PD 10/11 |
0 - 30 |
790 |
1027 |
2.00 |
|
PD 10/11 |
0 - 30 |
1600 |
2000 |
4.20 |
|
PD 10/11 |
0 - 30 |
3190 |
3190 |
7.00 |
|
Intermediate &
Larger sizes are available on request |
Couplings, Hubs, Shaft Mounted Gear Unit and Bearing details
will be added shortly here... |
|
<<Back<< |
|
