|
High Power Belts |
|
|
In some
critical applications, whenever torque is applied to the
belts, they get deflected in the pulley groove.
Such deflection leads to an uneven distribution of load
across the tension members.
Therefore, it is important for the compression rubber to be
resistant to the lateral force, when entering into the
pulley grooves. We have developed belts with the
characteristics to withstand this lateral force in wrapped
and raw edge constructions which are called PIX X'set®HP
and PIX X'tra®HP as and High Power Belts
respectively.
These high power belts are designed in such a way that a
composite layer with higher modulus across the belt section
and with good flexibility along the belt circumference
provides good support to High Modulus - Low Stretch (HMLS)
tension member and thereby enhancing the power rating of the
belt by 20% to 30% compared to the corresponding section of
a standard V-Belt.
With the High Power Belts, the number of belts in a matched
set of a multiple-belt-drive gets reduced and the belt life
is also improved significantly. The HMLS tension member
minimises the belt stretch, improving the machine-up time. |
 |
|
<<Back<< |
|
Armid Cord Belts Belts |
|
|
Aramid is an
organic polyaramide fibre that is manufactured using complex
chemical processes. It is generally used where the power
transmission requirements are very critical, apart from
space restrictions on the permissible installation and take
up allowances. Aramid is used as tension member because of
its high tensile strength.
Aramid Cord Belts
are recommended where,
•
There are restrictions on the drive width
• The installation & take-up allowances are minimal
• Critical drives
|
 |
|
Material |
Tensile
Strength Ib/in2 |
% Elongation at break |
|
|
Polyester |
162000 |
14 |
|
Aramid |
400000 |
4 |
|
The drive design calculation associated with this belt is
similar to the standard drive design procedure . We
recommend that customer should get back to us for further
information on this. |
|
<<Back<< |
|
PIX FRAS V-Belts (Fire Resistant & Anti-Static) |
|
|
PIX FRAS
V-Belts (Fire Resistant & Anti-Static) Certain working
evvironments such as coal mines & sensitive petro chemical
addition to normal anti-static properties. PIX FRAS
V-Belts are suitable for such environments. This construction is
thoroughly tested during & after manufacture, to comply with all
aspects of
IS-2494 Part - II & BS-3790. FRAS Belts are also
certified by ATEX.
Range: We can produce our entire range of belts in
FRAS construction.
Confoms to: ATEX Certification
|
 |
|
<<Back<< |
|
Dry Cover Belts |
|
|
These are suitable
for drives having clutch applications like lawn mowers and
chemical industries where contamination is not acceptable. PIX-X'set
DC Dry cover belts are usually manufactured in Blue colour and
can also be supplied in green, brown, red, black & white colours.
These are available in polyester as well as aramid
constructions.
Range: Entire range of Wrap Construction Belts |
 |
|
<<Back<< |
|
PIX Fractional Horse Power Belts (FHP/M) |
|
|
These belts are
mainly used on fractional horse power motors installed mainly
in domestic appliances.
|
|
|
Series |
2000 |
|
Top Width (mm) |
10.0 |
|
Thickness (mm) |
6.0 |
|
Angle (Degree) |
40.0 |
|
Range La (Inches) |
11" - 173" |
| |
|
|
<<Back<< |
|
PIX Light Duty Single V-Belts |
|
|
These belts are
used for a smaller sized machineries installed in the household
appliances and are available in three different sections to meet
the varying requirements. These are always used in single belt
drives.
|
|
|
Series |
3L |
4L |
5L |
|
Top Width (mm) |
10 |
13 |
17 |
|
Thickness (mm) |
6 |
8 |
10 |
|
Angle (deg) |
40 |
40 |
40 |
|
Range La (inches) |
10.5" - 160" |
15"-360" |
21"-220" |
| |
|
|
<<Back<< |
|
PIX Asymmetric Belts |
|
|
Asymmetric belts
find application in torque converter systems. They are generally
used in high performance golf-kart., snowmobiles, minibikes,
material handling equipment and Industrial equipment. |
 |
