|
PIX Hydraulic Hose is useful for medium pressure service
with high petroleum base hydraulic fluids, carrying hot
oils, grease, lubricants, Crude oil, fuel oil and water.
It is widely used for hydraulic fluid transmissions.
PIX also
manufactures Compact Hose which is smaller in diameter
with higher performance characteristic. It operates at
smaller bend radius (approximately 25% to 30% smaller),
its specialty is that the lining and cover thickness is
less as compared to the normal hydraulic hose with same
working pressure rating. It is light in weight & its
compactness also offers the advantage to use in
application having minimum space available.
<<Back<<
|
|
PIX - PERFORMER /T (Standards:
EN 853 1ST, SAE 100 R1S-A, ISO 1436) |
 |
|
Special Features: Qualified for double impulse cycles
(300,000 cycles) to relevant standards-EN 853 1ST / ISO 1436-1ST.
Thicker cover for very good abrasion resistance and weather protection.
Highly flexible, Light weight, easy to handle and route. |
Product
Code |
Dash |
DN |
Hose ID
(inch) |
Hose ID
(mm) |
Braid OD
(mm) |
Hose OD
(mm) |
Maximum Working
Pressure |
Minimum Burst
Pressure |
Min
Bend
Radius
mm |
Weight
Meter
Kgs/mtr |
Recomm
-anded
Ferrula |
|
MPa |
bar |
psi |
MPa |
bar |
psi |
|
PT106 |
-4 |
6 |
1/4 |
6.4 |
11.1 |
15.5 |
22.5 |
225 |
3263 |
90.0 |
900 |
13050 |
100 |
0.260 |
PF 11 06 |
|
PT108 |
-5 |
8 |
5/16 |
7.9 |
12.7 |
17.1 |
21.5 |
215 |
3118 |
86.0 |
860 |
12470 |
115 |
0.305 |
PF 11 08 |
|
PT110 |
-6 |
10 |
3/8 |
9.5 |
15.1 |
19.8 |
18.0 |
180 |
2610 |
72.0 |
720 |
10440 |
125 |
0.396 |
PF 11 10 |
|
PT112 |
-8 |
12 |
1/2 |
12.7 |
18.3 |
22.6 |
16.0 |
160 |
2320 |
64.0 |
640 |
9280 |
180 |
0.475 |
PF 11 12 |
|
PT116 |
-10 |
16 |
5/8 |
15.9 |
21.4 |
26.0 |
13.0 |
130 |
1885 |
52.0 |
520 |
7540 |
205 |
0.613 |
PF 11 16 |
|
PT119 |
-12 |
19 |
3/4 |
19.0 |
25.4 |
29.8 |
10.5 |
105 |
1523 |
42.0 |
420 |
6090 |
240 |
0.783 |
PF 11 19 |
|
PT125 |
-16 |
25 |
1 |
25.4 |
33.3 |
37.5 |
9.0 |
90 |
1305 |
36.0 |
360 |
5220 |
300 |
1.058 |
PF 11 25 |
|
PT131 |
-20 |
31 |
1-1/4 |
31.8 |
40.5 |
45.5 |
6.3 |
63 |
914 |
25.0 |
250 |
3654 |
420 |
1.410 |
PF 11 31 |
|
PT138 |
-24 |
38 |
1-1/2 |
38.1 |
46.8 |
52.4 |
5.0 |
50 |
725 |
20.0 |
200 |
2900 |
500 |
1.860 |
PF 11 38 |
|
PT151 |
-32 |
51 |
2 |
50.8 |
60.2 |
66.3 |
4.0 |
40 |
580 |
16.0 |
160 |
2320 |
630 |
2.470 |
PF 11 51 |
|
Application:
Medium to high pressure hydraulic lines where self abrasion
and inter substrate abrasion is foreseen. Suitable for petroleum based
hydraulic fluids, synthetic esters, biodegradable hydraulic fluids,
water-glycol based fluids and air.
<<Back<<
|
|
PERFORMER/T 100R2A
(Standards: EN
853 2ST, ISO 1436) |
 |
|
Application:
Medium to high pressure hydraulic lines where self abrasion and
inter substrate abrasion is foreseen. Suitable for petroleum
based hydraulic fluids, synthetic esters, biodegradable
hydraulic fluids, water-glycol based fluids and air. |
Product
Code |
Dash |
DN |
Hose ID
(inch) |
Hose ID
(mm) |
Braid OD
(mm) |
Hose OD
(mm) |
Maximum Working
Pressure |
Minimum Burst
Pressure |
Min
Bend
Radius
mm |
Weight
Meter
Kgs/mtr |
Recomm
-anded
Ferrula |
|
MPa |
bar |
psi |
MPa |
bar |
psi |
|
PT206 |
-4 |
6 |
1/4 |
6.4 |
12.7 |
17.0 |
40.0 |
400 |
5800 |
160.0 |
1600 |
23200 |
100 |
0.445 |
PF 12 06 |
|
PT208 |
-5 |
8 |
5/16 |
7.9 |
14.3 |
18.8 |
35.0 |
350 |
5000 |
140.0 |
1400 |
20000 |
115 |
0.518 |
PF 12 08 |
|
PT210 |
-6 |
10 |
3/8 |
9.5 |
16.7 |
21.1 |
33.0 |
330 |
4785 |
132.0 |
1320 |
19140 |
125 |
0.626 |
PF 12 10 |
|
PT212 |
-8 |
12 |
1/2 |
12.7 |
19.8 |
24.1 |
27.5 |
275 |
3988 |
110.0 |
1100 |
15950 |
180 |
0.732 |
PF 12 12 |
|
PT216 |
-10 |
16 |
5/8 |
15.9 |
23.0 |
27.4 |
25.0 |
250 |
3625 |
100.0 |
1000 |
14500 |
205 |
0.876 |
PF 12 16 |
|
PT219 |
-12 |
19 |
3/4 |
19.0 |
27.0 |
31.2 |
21.5 |
215 |
3118 |
86.0 |
860 |
12470 |
240 |
1.160 |
PF 12 19 |
|
PT225 |
-16 |
25 |
1 |
25.4 |
35.1 |
39.0 |
16.5 |
165 |
2393 |
66.0 |
660 |
9570 |
300 |
1.377 |
PF 12 25 |
|
PT231 |
-20 |
31 |
1-1/4 |
31.8 |
45.0 |
50.6 |
12.5 |
125 |
1813 |
50.0 |
500 |
7250 |
420 |
2.266 |
PF 12 31 |
|
PT238 |
-24 |
38 |
1-1/2 |
38.1 |
50.8 |
57.2 |
9.0 |
90 |
1305 |
36.0 |
360 |
5220 |
500 |
2.604 |
PF 12 38 |
|
PT251 |
-32 |
51 |
2 |
50.8 |
63.3 |
68.4 |
8.0 |
80 |
1160 |
32.0 |
320 |
4640 |
630 |
3.384 |
PF 12 51 |
|
PT2102 |
-64 |
102 |
4 |
101.6 |
113.0 |
120.0 |
4.0 |
40 |
580 |
16.0 |
160 |
2320 |
1250 |
5.800 |
* * |
Special Features: Qualified for double impulse cycles
(400,000 cycles) to relevant standards EN 853
2ST /ISO 1436 - 2ST. Thicker cover for very good abrasion
resistance and weather protection.
Working temperature:
-40°C To +100°C (Continuous)
Intermittent temperature: -40°C to +120°C (10% of total working
hours)
For air application (Temp. Max 70°C) & pressure above 17 bar
cover must be pin pricked
Special MSHA approved flame resistant outer cover
can be provided on request.
<<Back<<
|
Designed & Maintained
by PIX Transmissions Limited, India |
| | | |
