PIX - BRUTE + / K (Standards: PIX Proprietary. Exceeds pressure rating of EN 857 2SC)
Special Features:
Working pressure exceeds by 15-30% to EN 857 2SC standard. Good flexibility with low bend radius for complex high pressure hydraulic circuits. Validated for 300,000 impulse cycles.
 
Product
Code		 Dash DN Hose ID
(inch)		 Hose ID
(mm)		 Braid OD
(mm)		 Hose OD
(mm)		 Maximum Working
Pressure		 Minimum Burst
Pressure		 Min
Bend
Radius
mm		 Weight
Meter
Kgs/mtr		 Recomm
-anded
Ferrula
MPa bar psi MPa bar psi
BX206 -4 6 1/4 6.4 11.4 13.5 45.0 450 6525 180.0 1800 26100 50 0.310 PF 22 06
BX208 -5 8 5/16 7.9 13.0 15.0 42.0 420 6000 168.0 1680 24000 65 0.360 PF 22 08
BX210 -6 10 3/8 9.5 15.1 17.1 38.0 380 5510 152.0 1520 22040 80 0.440 PF 22 10
BX212 -8 12 1/2 12.7 18.7 20.9 32.5 325 4713 130.0 1300 18850 90 0.550 PF 22 12
BX216 -10 16 5/8 15.9 23.0 25.1 29.0 290 4205 116.0 1160 16820 120 0.600 PF 12 16
BX219 -12 19 3/4 19.0 25.5 27.9 28.0 280 4000 112.0 1120 16000 120 0.875 PF 12 19
BX225 -16 25 1 25.4 33.0 35.4 21.0 210 3000 84.0 840 12000 150 1.290 PF 12 25
 

Application:
Suitable to carry petroleum based hydraulic fluids such as mineral oils, fuels, hydrocarbons, etc. and glycol-water based fluids at high pressure.

Working temperature: - 40°C to + 100°C (Continuous).
Intermittent temperature: - 40°C to + 120°C (10% of total working hours)
For air application (Temp. max 70°C) & pressure above 17 bar cover must be pin pricked.
Special MSHA approved flame resistant outer cover can be provided on request

<< Back<<

Designed & Maintained by PIX Transmissions Limited, India