|
Products-Half
Bend Radius Hydraulic Hose-range |
|
PIX - ULTRAFLEX (Standards: PIX
Proprietary. EN 853 1SN, SAE 100 R1S-AT, ISO 1436 for reference)
|
 |
|
Special Features: Very good flexibility. Half bend radius than
relevant standards EN 853 / EN 857/SAE 100R1S/SAE 100R2S/SAE100 R12.
Very low MBR for short assembly length and very narrow installation. |
Product
Code |
Dash |
DN |
Hose
ID
(inch) |
Hose
ID
(mm) |
Braid
OD
(mm) |
Hose
OD
(mm) |
Maximum Working
Pressure |
Minimum Burst
Pressure |
Minimum Bend
Radius |
Weight
Meter
Kgs/mtr |
|
MPa |
bar |
psi |
MPa |
bar |
psi |
mm |
|
UF106 |
-4 |
6 |
1/4 |
6.4 |
11.2 |
13.2 |
22.5 |
225 |
3263 |
90.0 |
900 |
13050 |
50 |
0.225 |
|
UF108 |
-5 |
8 |
5/16 |
7.9 |
13.0 |
15.0 |
21.5 |
215 |
3118 |
86.0 |
860 |
12470 |
58 |
0.275 |
|
UF110 |
-6 |
10 |
3/8 |
9.5 |
15.3 |
17.3 |
18.0 |
180 |
2610 |
72.0 |
720 |
10440 |
65 |
0.350 |
|
UF112 |
-8 |
12 |
1/2 |
12.7 |
18.5 |
20.6 |
16.0 |
160 |
2320 |
64.0 |
640 |
9280 |
90 |
0.410 |
|
UF116 |
-10 |
16 |
5/8 |
15.9 |
21.8 |
23.9 |
13.0 |
130 |
1885 |
52.0 |
520 |
7540 |
100 |
0.520 |
|
UF119 |
-12 |
19 |
3/4 |
19.0 |
25.4 |
27.6 |
10.5 |
105 |
1523 |
42.0 |
420 |
6090 |
120 |
0.645 |
|
UF125 |
-16 |
25 |
1 |
25.4 |
33.2 |
35.3 |
9.0 |
90 |
1305 |
36.0 |
360 |
5220 |
150 |
1.000 |
|
|
Impulse
performance: 300,000 cycles
|
|
PIX - ULTRAFLEX (Standards: PIX
Proprietary. EN 853 2SN, SAE 100 R2S-AT, ISO 1436
for reference)
|
 |
Product
Code |
Dash |
DN |
Hose
ID
(inch) |
Hose
ID
(mm) |
Braid
OD
(mm) |
Hose
OD
(mm) |
Maximum Working
Pressure |
Minimum Burst
Pressure |
Minimum Bend
Radius |
Weight
Meter
Kgs/mtr |
|
MPa |
bar |
psi |
MPa |
bar |
psi |
mm |
|
UF206 |
-4 |
6 |
1/4 |
6.4 |
12.7 |
14.9 |
40.0 |
400 |
5800 |
160.0 |
1600 |
23200 |
50 |
0.400 |
|
UF208 |
-5 |
8 |
5/16 |
7.9 |
14.6 |
16.7 |
35.0 |
350 |
5000 |
140.0 |
1400 |
20000 |
58 |
0.460 |
|
UF210 |
-6 |
10 |
3/8 |
9.5 |
17.2 |
19.1 |
33.0 |
330 |
4785 |
132.0 |
1320 |
19140 |
65 |
0.550 |
|
UF212 |
-8 |
12 |
1/2 |
12.7 |
20.0 |
22.1 |
27.5 |
275 |
3988 |
110.0 |
1100 |
15950 |
90 |
0.640 |
|
UF216 |
-10 |
16 |
5/8 |
15.9 |
23.0 |
25.3 |
25.0 |
250 |
3625 |
100.0 |
1000 |
14500 |
100 |
0.780 |
|
UF219 |
-12 |
19 |
3/4 |
19.0 |
27.2 |
29.6 |
21.5 |
215 |
3118 |
86.0 |
860 |
12470 |
120 |
0.975 |
|
UF225 |
-16 |
25 |
1 |
25.4 |
35.4 |
37.7 |
16.5 |
165 |
2393 |
66.0 |
660 |
9570 |
150 |
1.420 |
|
Impulse
performance: 400,000 cycles
Application:
Medium to high pressure hydraulic lines. Suitable for petroleum based
hydraulic fluids, synthetic esters, biodegradable hydraulic fluids,
water-glycol based fluids and air.
Working
Temperature: - 40°C to +100°C (Continuous).
Intermittent Temperature: - 40°C to +120°C (10% of total working
hours).
For air application (Temp. max 70°C) & pressure above 17 bar
cover must be pin pricked.
Special MSHA approved flame resistant outer cover can be
provided on request.
|
|
<<BACK<< |
