|
Products-Half
Bend Radius Hydraulic Hose-range |
|
PIX -
ULTRAFLEX / K (Standards: PIX Proprietary. EN 857 1SC, ISO 11237-1 for
reference ) |
 |
|
Special Features: Very good flexibility. Half bend radius than
relevant standards EN 853 / EN 857/SAE 100R1S/SAE 100R2S/SAE100 R12.
Very low MBR for short assembly length and very narrow installation. |
Product
Code |
Dash |
DN |
Hose
ID
(inch) |
Hose
ID
(mm) |
Braid
OD
(mm) |
Hose
OD
(mm) |
Maximum Working
Pressure |
Minimum Burst
Pressure |
Minimum Bend
Radius |
Weight
Meter
Kgs/mtr |
|
MPa |
bar |
psi |
MPa |
bar |
psi |
mm |
|
UF106K |
-4 |
6 |
1/4 |
6.4 |
10.5 |
12.5 |
22.5 |
225 |
3263 |
90.0 |
900 |
13050 |
38 |
0.190 |
|
UF108K |
-5 |
8 |
5/16 |
7.9 |
11.5 |
13.5 |
21.5 |
215 |
3118 |
86.0 |
860 |
12470 |
43 |
0.205 |
|
UF110K |
-6 |
10 |
3/8 |
9.5 |
13.7 |
15.7 |
18.0 |
180 |
2610 |
72.0 |
720 |
10440 |
45 |
0.260 |
|
UF112K |
-8 |
12 |
1/2 |
12.7 |
17.0 |
19.0 |
16.0 |
160 |
2320 |
64.0 |
640 |
9280 |
65 |
0.325 |
|
UF116K |
-10 |
16 |
5/8 |
15.9 |
20.4 |
22.4 |
13.0 |
130 |
1885 |
52.0 |
520 |
7540 |
75 |
0.405 |
|
UF119K |
-12 |
19 |
3/4 |
19.0 |
23.8 |
25.8 |
10.5 |
105 |
1523 |
42.0 |
420 |
6090 |
90 |
0.520 |
|
UF125K |
-16 |
25 |
1 |
25.4 |
31.4 |
33.5 |
9.0 |
90 |
1305 |
36.0 |
360 |
5220 |
115 |
0.730 |
|
Impulse
performance: 300 000 cycles.
|
|
PIX -
ULTRAFLEX / K (Standards: PIX Proprietary. EN 857 2SC, SAE 100 R16S, ISO 11237-1
for reference )
|
 |
Product
Code |
Dash |
DN |
Hose
ID
(inch) |
Hose
ID
(mm) |
Braid
OD
(mm) |
Hose
OD
(mm) |
Maximum Working
Pressure |
Minimum Burst
Pressure |
Minimum Bend
Radius |
Weight
Meter
Kgs/mtr |
|
MPa |
bar |
psi |
MPa |
bar |
psi |
mm |
|
UF206K |
-4 |
6 |
1/4 |
6.4 |
11.4 |
13.5 |
40.0 |
400 |
5800 |
160.0 |
1600 |
23200 |
38 |
0.305 |
|
UF208K |
-5 |
8 |
5/16 |
7.9 |
13.0 |
15.0 |
35.0 |
350 |
5000 |
140.0 |
1400 |
20000 |
43 |
0.345 |
|
UF210K |
-6 |
10 |
3/8 |
9.5 |
15.1 |
17.1 |
33.0 |
330 |
4785 |
132.0 |
1320 |
19140 |
45 |
0.420 |
|
UF212K |
-8 |
12 |
1/2 |
12.7 |
18.3 |
20.5 |
27.5 |
275 |
3988 |
110.0 |
1100 |
15950 |
65 |
0.520 |
|
UF216K |
-10 |
16 |
5/8 |
15.9 |
21.5 |
23.5 |
25.0 |
250 |
3625 |
100.0 |
1000 |
14500 |
85 |
0.620 |
|
UF219K |
-12 |
19 |
3/4 |
19.0 |
25.5 |
27.5 |
21.5 |
215 |
3118 |
86.0 |
860 |
12470 |
100 |
0.855 |
|
UF225K |
-16 |
25 |
1 |
25.4 |
33.5 |
35.5 |
16.5 |
165 |
2393 |
66.0 |
660 |
9570 |
125 |
1.110 |
|
|
Impulse
performance: 400 000 cycles.
Application:
Medium to high pressure hydraulic lines. Suitable for petroleum
based hydraulic fluids, synthetic esters, biodegradable
hydraulic fluids, water-glycol based fluids and air.
Working
Temperature: - 40°C to +100°C (Continuous).
Intermittent Temperature: - 40°C to +120°C (10% of total working
hours).
For air application (Temp. max 70°C) & pressure above 17 bar
cover must be pin pricked.
Special MSHA approved flame resistant outer cover can be
provided on request.
<<BACK<<
|
